<nav id="iscwu"><strong id="iscwu"></strong></nav>
  • <nav id="iscwu"></nav>
  • "

    ✅亚洲信誉最的购彩平台✅㊣全球最大,最信誉的线上综合平台✅亚洲信誉最的购彩平台✅千款游戏,砖石级服务,亚洲信誉最的购彩平台,欢迎各界玩家加入体验!

    <nav id="iscwu"><strong id="iscwu"></strong></nav>
  • <nav id="iscwu"></nav>
  • "
    English
    ChineseEnglish

    Die-casting Zinc Alloy-3#

    3#Zinc Alloy has excellent balance in physical and mechanical properties,with excellent casting and die casting,it suitable for automotive,electronic communications and other mechanical parts,as well as suitable for toys,locks and other hardware.

    Chemical composition:
    Al:3.9-4.3% Mg:0.03-0.06% Cu≤0.03% Zn:Margin Pb≤0.003% Fe≤0.02% Cd≤0.003% Sn≤0.001%

    Product introduction


    Performance Caracteristics

    1. The product meets the standards of China, the United States and theEuropean Union, and it conforms to the requirements of ROHS, EN71Part3, EN1811,CPSIA and so on.

    2. The remelting temperature is low, the slag content is small, and theinternal crystallization is fine.

    3. Physical and mechanical properties, castability and dimensionalstability, and creep resistance are good.

    Directions For Use

    1. Bake and dry before use, do not stir and do not catch slag when feeding;the scum above the molten liquid is stirred calmly with a slag rake to gatherit and take it out.

    2. The nozzle material is put into the proportion of 25% to 30%, and thereis no need for slag.

    3.The optimum temperature of diecasting is 420 ℃-435 , and the optimum temperature of mouldis 210 -230 . Theupper limit of die casting temperature for thin wall parts and complex parts,and the lower limit for thick wall parts and simple parts should be taken.

    4. There may be the following phenomena in the course of use: there is athin oil film on the surface of the alloy liquid, and at the same time, therewill be a small amount of black film, all of which are normal.

    Packaging and storage

    The product is a block silver-white metal, and stacked neatly. TheChinese version each bundle 108 pieces (English version each bundle 130pieces), with galvanized steel strip bundled, and packed in PVC bags. If theproduct is not used up after opening the seal, it is best to re-seal in orderto dustproof and reduce oxidation. Also, this product needed to be store inventilated, dry, non-corrosive places, and pay attention to moistureproof.

    Downloading

    Watch us

    Contact mode

    Address: A5 District, Bai Tu Town Economic Development Zone, Qujiang District, Shaoguan City, Guangdong Province
    Tel:0751-6482999(Shaoguan)
    Fax:0751-6483555(Shaoguan)
    Email:jinyihejin999@21cn.com(Shaoguan)

    Address: No.34 Jinyi Center, Guangfo Road, Huangqi, Nanhai District, Foshan City, Guangdong Province

    Tel:0757-85921801 / 81181809(Foshan)
    Fax:0757-81181807(Foshan)

    亚洲信誉最的购彩平台